Draining water outlet, Dakota, Thermoplastic, 62.5x18x3.2 cm xØ80 mm

Supply and installation of draining outlet consists in a flange corner and a circular tube long 500 mm. Made of TPE (thermoplastic elastomer). Used for the complete evacuation of rainwater in roof.Used for the complete evacuation of rainwater in roof.Apply a coat of primer in the area around the hole. Apply a first layer of cover membrane. Insert the plug in the hole and mark the point in which it must be cut. Heat the surface of the waterproof membrane, then adhere to the outlet flange. Heat a small piece of membrane. Spread with a spatula on the flange to enable the pipe to adhere to the cover membrane. Apply a second waterproofing layer, heating the bitumen, after covering both the flange and the membrane.